test

Garage

Garage, outdoor cover - Covertechnology.com

With a Cover Technology outdoor cover, garages to increase performance can be constructed quickly and easily. Thanks to the wide choice of colours and the availability of bespoke sizes, modular covers are able to fit perfectly into a wide variety of environmental contexts. The GARAGE construction consists of an aluminium and steel frame covered with technical PVC fabric or sandwich panels. The choice of materials allows shipping low weights and compact volumes, rapid assembly and impressive resistance to weather loads. The key feature of the GARAGE structure is the creation of a central area for vehicle maintenance and a series of side areas and containers to accommodate functions such as a warehouse, an engineering workshop, a management office or toilet facilities.

CONFIGURATION
Width Minimum 10.00 metres / Maximum 40.00 metres
Length Standard modules 05.00 metres / total length infinite
Side height Minimum 02.50 metres / Maximum 09.00 metres
Wind resistance Minimum 25 m/sec / Maximum 41 m/sec
Snow resistance Minimum 60 daN/m² / Maximum 400 daN/m²
Cover fire resistance class Self-extinguishing – Flame Retardant Class 2
Operating temperature -30 °C  /  +70 °C

GARAGE structures are of modular design, allowing:

  • DIFFERENT CONFIGURATIONS (open hangar, runway hangar, tunnel hangar, large-door aeroplane hangar, helicopter hangar and servicing hangar)
  • INSTALLATION ON DIFFERENT SURFACES (asphalt, concrete, dirt, or sand) thanks to a special anchor system (anchoring with threaded bars, plates and nails or spiral bars)
  • DESIGN WITH A SPECIFIC SNOW BEARING CAPACITY, ranging from 60 kg/sq. m for the basic structure up to 400 kg/sq. m for areas with very high snowfall
  • CE MARKING of the structural components in compliance with the EN 1090-1:2009+A1:2011 standard thanks to Cover Technology’s accreditation.

It is also important to note that structures are designed and constructed in compliance with the Italian Ministerial Decree dated 14.01.2008 (known as the Technical Construction Standards or NTC2008 with return time Tr 50 years) and in compliance with the Eurocodes.

The supporting frame consists of extruded aluminium alloy profiles, creating a lightweight structure that withstands all weather conditions. Roofs and side walls are in flame-retardant, waterproof, very tough, PVC fabric. Naturally, there is a very wide selection of materials to suit the different uses and locations of structures. The main materials used in construction of GARAGE structures are:

MATERIALS
Main structure components Aluminium alloy profiles
Base plate elements Hot-dip galvanised steel
Cover Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels
Side walls, if required Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels
Doors or openings, if required Folding vehicle doors / personnel doors
Metal cables Plastic-coated steel cable
Supporting surface Plinth not required
Anchor systems for concrete surfaces Threaded bars fixed with structural vinyl/epoxy resins
Anchor systems for firm ground and asphalt surfaces Steel nails driven into the ground
Anchor systems for loose ground Continuous spiral coils or rods

Apart from the STANDARD PVC sheeting, the cover may be in:

  • PVC fabrics with blackout treatment for sun protection
  • Thick PVC fabrics (strong cover)
  • Low-emission (silver-coated) or insulated PVC fabrics
  • PVC fabrics with special coating

Cover Technology over the years has realized several installations, please find below some related examples.

  • For a vehicle maintenance center in Rome has been realized a garage with size of 26x75m.

Garage, outdoor cover - Covertechnology.com

The website includes a section dedicated to technical data and operating characteristics, to provide full details of the many accessories and complementary systems available. The accessories available for the GARAGE are:

  • INSULATION
  • DRINKING WATER TREATMENT UNITS
  • CONTAINERS
  • ELECTRICAL
  • CONVENTIONAL LIGHTING SYSTEMS
  • LED LIGHTING SYSTEMS
  • HEATING AND AIR-CONDITIONING
  • SMOKE DETECTION
  • ACCESS CONTROL SYSTEMS
  • LIFTING SYSTEMS
  • ASSEMBLY KITS
  • REPAIR KITS
  • DOORS AND SCREENS
  • WINDOWS
  • MODULAR FLOORINGS
  • DUST-PROOF MATTING
  • PLASTIC FLOORING
Design
The Technical Area, with its dynamic, highly qualified staff, is able to offer
genuine solutions to every kind of design need. Experience and attention
to details allow the construction of strong, safe outdoor covers and
tensile structures
, developed with the use of leading-edge materials...
Name*
Company*
Telephone
Town*
E-mail*
Message*

CONTACT US FOR GENERAL
INFORMATION OR PRODUCT DETAILS.
For information or details about the best solution for your needs, fill in the Form.
The fields marked with an asterisk (*) are required!