RIDING ARENA COVERS

Cover Technology specialises in the design and production of the widest range of riding school covers currently available on the Italian market, for covering spaces of all sizes. With their modular design and low environmental impact, these structures are particularly suitable for meeting covering requirements. Cover Technology modular tensile structures are produced to high quality and safety standards, as confirmed by the external organisations that have verified their compliance with the ISO 9001:2008 and SOA standard. A variety of shapes may be used for riding school covers:

STRAIGHT PITCHED
“COVER INNOVATION” CURVED
POLYGONAL

There are also different kinds of side enclosures

OPEN sided covered riding school
ENCLOSED sided covered riding school
ENCLOSED sided covered riding school WITH WINDBREAKER MESH

The COVERED RIDING SCHOOL construction consists of an aluminium and steel frame covered with technical PVC fabric or sandwich panels. The choice of materials allows shipping low weights and compact volumes, rapid assembly and impressive resistance to weather loads. The key feature of the COVERED RIDING SCHOOL is that it can be adapted to various aviation purposes, such as plane and helicopter service, painting hangars, storage hangars and runway hangars.

VIDEO

TECHNICAL DATA SHEET
TECHNICAL MATERIALS
ACCESSORIES

CONFIGURATION
Width	Minimum 10.00 metres / Maximum 50.00 metres
Length	Standard modules 05.00 metres / total length infinite
Side height	Minimum 02.50 metres / Maximum 09.00 metres
Wind resistance	Minimum 25 m/sec / Maximum 41 m/sec
Snow resistance	Minimum 60 daN/m² / Maximum 400 daN/m²
Cover fire resistance class	Self-extinguishing – Flame Retardant Class 2
Operating temperature	-30 °C / +70 °C

The COVERED RIDING SCHOOL is of modular design, allowing:

DIFFERENT CONFIGURATIONS
INSTALLATION ON DIFFERENT SURFACES (asphalt, concrete, dirt, or sand) thanks to a special anchor system (with threaded bars, plates and nails or spiral bars)
DESIGN WITH A SPECIFIC SNOW BEARING CAPACITY, ranging from 60 kg/sq. m for the basic structure up to 400 kg/sq. m for areas with very high snowfall
CE MARKING of the structural components in compliance with the EN 1090-1:2009+A1:2011 standard thanks to Cover Technology’s accreditation.

It is also important to note that structures are designed and constructed in compliance with the Italian Ministerial Decree dated 17.01.2018 (known as the Technical Construction Standards or NTC2008 with return time Tr 50 years) and in compliance with the Eurocodes.

The supporting frame consists of extruded aluminium alloy profiles, creating a lightweight structure that withstands all weather conditions. Roofs and side walls are in flame-retardant, waterproof, very tough, PVC fabric. Naturally, there is a very wide selection of materials to suit the different uses and locations of structures. The main materials used in construction of the COVERED RIDING SCHOOL structure are:

MATERIALS
Main structure components	Aluminium alloy profiles
Base plate elements	Hot-dip galvanised steel
Cover	Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels
Side walls, if required	Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels
Doors or openings, if required	Large vertical folding doors for aircraft / Vertical folding doors for vehicles / personnel doors
Metal cables	Plastic-coated steel cable
Supporting surface	Plinth not required
Anchor systems for concrete surfaces	Threaded bars fixed with structural vinyl/epoxy resins
Anchor systems for firm ground and asphalt surfaces	Steel nails driven into the ground
Anchor systems for loose ground	Continuous spiral coils or rods

Apart from the STANDARD PVC sheeting, the cover may be in:

PVC fabrics with blackout treatment for sun protection
Thick PVC fabrics (strong cover)
Low-emission (silver-coated) or insulated PVC fabrics
PVC fabrics with special coating

The website includes a section dedicated to technical data and operating characteristics, to provide full details of the many accessories and complementary systems available. The accessories available for the COVERED RIDING SCHOOL structure are:

INSULATION
ELECTRICAL
CONVENTIONAL LIGHTING SYSTEMS
LED LIGHTING SYSTEMS
ACCESS CONTROL SYSTEMS
LIFTING SYSTEMS
ASSEMBLY KITS
REPAIR KITS

TECHNICAL DATA SHEET

CONFIGURATION
Width	Minimum 10.00 metres / Maximum 50.00 metres
Length	Standard modules 05.00 metres / total length infinite
Side height	Minimum 02.50 metres / Maximum 09.00 metres
Wind resistance	Minimum 25 m/sec / Maximum 41 m/sec
Snow resistance	Minimum 60 daN/m² / Maximum 400 daN/m²
Cover fire resistance class	Self-extinguishing – Flame Retardant Class 2
Operating temperature	-30 °C / +70 °C

The COVERED RIDING SCHOOL is of modular design, allowing:

DIFFERENT CONFIGURATIONS
INSTALLATION ON DIFFERENT SURFACES (asphalt, concrete, dirt, or sand) thanks to a special anchor system (with threaded bars, plates and nails or spiral bars)
DESIGN WITH A SPECIFIC SNOW BEARING CAPACITY, ranging from 60 kg/sq. m for the basic structure up to 400 kg/sq. m for areas with very high snowfall
CE MARKING of the structural components in compliance with the EN 1090-1:2009+A1:2011 standard thanks to Cover Technology’s accreditation.

It is also important to note that structures are designed and constructed in compliance with the Italian Ministerial Decree dated 17.01.2018 (known as the Technical Construction Standards or NTC2008 with return time Tr 50 years) and in compliance with the Eurocodes.

TECHNICAL MATERIALS

The supporting frame consists of extruded aluminium alloy profiles, creating a lightweight structure that withstands all weather conditions. Roofs and side walls are in flame-retardant, waterproof, very tough, PVC fabric. Naturally, there is a very wide selection of materials to suit the different uses and locations of structures. The main materials used in construction of the COVERED RIDING SCHOOL structure are:

MATERIALS
Main structure components	Aluminium alloy profiles
Base plate elements	Hot-dip galvanised steel
Cover	Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels
Side walls, if required	Modular sheets of Class 2 Flame-Retardant PVC / Sandwich panels
Doors or openings, if required	Large vertical folding doors for aircraft / Vertical folding doors for vehicles / personnel doors
Metal cables	Plastic-coated steel cable
Supporting surface	Plinth not required
Anchor systems for concrete surfaces	Threaded bars fixed with structural vinyl/epoxy resins
Anchor systems for firm ground and asphalt surfaces	Steel nails driven into the ground
Anchor systems for loose ground	Continuous spiral coils or rods

Apart from the STANDARD PVC sheeting, the cover may be in:

PVC fabrics with blackout treatment for sun protection
Thick PVC fabrics (strong cover)
Low-emission (silver-coated) or insulated PVC fabrics
PVC fabrics with special coating

ACCESSORIES

The website includes a section dedicated to technical data and operating characteristics, to provide full details of the many accessories and complementary systems available. The accessories available for the COVERED RIDING SCHOOL structure are:

INSULATION
ELECTRICAL
CONVENTIONAL LIGHTING SYSTEMS
LED LIGHTING SYSTEMS
ACCESS CONTROL SYSTEMS
LIFTING SYSTEMS
ASSEMBLY KITS
REPAIR KITS

RIDING ARENA COVERS

RIDING ARENA COVERS

VIDEO

OTHER PRODUCTS

ROUND PENS

SPORTS FIELD COVERS

ICE RINKS COVERS

CONTACT

info@covertechnology.com

+39 030 69 08 111

Via Caplà, 3 - Serle (Brescia) Italia